Household & Laundry Spout Pouch
Custom Dish Soap Refill Spout Pouch for Kitchen
Dish soap spout pouches for sink-side use, with a pump or flip cap and a bore sized for thick gel. Printed from your artwork, MOQ 50,000 pcs per size.
Specifications
- Product Type
- Dish Soap Refill Pouch
- Application
- Dish soap, washing-up liquid, kitchen cleaner refill
- Capacity
- 500 ml – 1 L (custom)
- Pouch Type
- Stand-up spout pouch, top spout
- Material
- PET/PE · PET/AL/PE · mono-PE
- Spout
- Bore sized to the gel viscosity
- Cap
- Pump / flip cap / screw cap
- Printing
- Gravure, customer-supplied artwork
- Finish
- Matte / glossy
- MOQ
- 50,000 pcs per size · 1,000 pcs to trial
- Trial
- 1,000 pcs, one design
- Samples
- Free stock samples; printed samples 7–10 days
- Production
- 15–20 days after deposit and artwork approval
- Certification
- ISO 9001, ISO 22000
Custom Dish Soap Refill Spout Pouch
A dish soap pouch lives in the hardest place in the house: on a counter beside a running tap, handled with greasy hands, splashed every time the tap is turned on, and expected to look presentable for a month.
These are stand-up spout pouches for dish soap and washing-up liquid, 500 ml to 1 L, printed with your artwork. Bulk MOQ is 50,000 pcs per size, with a 1,000-pc trial before you commit.
The sink decides the pack
Three things happen at a sink that do not happen in a shower or on a shop shelf. Hands are greasy, so anything that needs a grip gets dropped. The counter is wet, so a pouch that stands on a paper base becomes a soggy base. And the pack is looked at a hundred times a day, so the print is the brand for a month, not for a minute in a shop.
That argues for a pack that stands on its own base, in a size that does not need two hands, with a cap that opens on contact rather than on a twist.
Pump or flip
At the sink the pack usually stays put and dispenses into a sponge or a brush, which is what a pump is for — it turns the pouch into a dispenser and removes the cap from the routine entirely.
A flip cap does the same job for smaller formats and for refill bottles that travel home from the shop. A screw cap is the one to avoid here: it needs a second hand, and at a sink the second hand is holding something else.
Thick product, small neck
Dish soap is thick. Poured into a narrow bottle neck it fills slowly and backs up, and poured out of a wide spout it arrives faster than the sponge can take. The two ends of the same problem are the bore and the bottle the customer refills — match the bore to the gel, then check the pour into the actual neck, not a typical one.
If the pack is a direct-dispense pump rather than a refill, the bore follows the pump collar and the gel has to clear it without stringing.
Print that survives a wet counter
A kitchen is a bad place for a matt film with heavy ink coverage: water sits on it, a cloth goes over it, and the print is the first thing to look tired.
Two practical choices. Keep large solid ink areas off the areas that get handled, and put the brand on the upper half of the face where hands do not sit. If the artwork is ink-heavy by design, say so at quotation stage — surface and lamination can be specified for it, but only before the film is ordered.
The minimum, and why it is the same as every pouch here
Every spout pouch on this site starts at 50,000 pcs per size, and dish soap is no exception — the number is set by the print cylinder, which is made once for one artwork and one repeat length, not by what is being filled.
A 1,000-pc trial runs on that same cylinder before you commit to bulk. Stock samples ship free; a printed sample takes 7–10 days; production runs 15–20 days from artwork approval and deposit.
What to send for a quotation
What to send for a quotation
- fill volume, and whether it replaces a bottle or dispenses directly
- how thick the soap is, or just the product name
- pump, flip or screw — and whether it sits by a sink or travels
- artwork status, and how much solid ink it carries
- whether the back panel needs legal or dosing copy
FAQ
Can the pouch be hung above the sink?
It can be specified with a hook or a euro-slot, but a hung pack carries its weight from the top seal, so the base, the fill weight and the spout position all change. That has to be decided before the artwork — it cannot be retrofitted to a standing design.
Will the print rub off with daily wiping?
Not from normal wiping. What wears print is abrasion against a hard edge and standing water on an unlaminated surface, which is why the film and finish are chosen for the environment rather than for the shelf. Tell us it will live beside a sink and the specification follows from that.
Do you make larger dish soap formats?
Yes — up to 5 L in the same construction, for refill stations and bulk. Past that size the question becomes how the pack is lifted and poured, which is a different design conversation.
