Home Care Packaging Solutions
Laundry Detergent Pouch: Poured, Not Squeezed
Detergent is poured, not squeezed. What that decides about the spout, the film and the size — and what to send for a quote.
Laundry Detergent Spout Pouch
Detergent is the one home-care liquid nobody squeezes. It gets poured — into a dosing cap, into the machine drawer, or back into the bottle the customer already owns. That one fact decides more of this pack than the formula does.
Poured, not squeezed
A cosmetic pouch is squeezed with the palm, so the spout can sit centred and the bore stays small. A detergent pouch is tipped, so the spout goes where gravity helps: at the top, or in the corner, so the pack empties without glugging and without the customer holding it upside down over a drawer.
The bore follows the same logic. Concentrate pours slowly, standard detergent pours fast, and thick gel detergent is the case that needs a decision rather than a default.
Weight decides the film
Two litres is two kilos. Five litres is over five. That load, not the chemistry, is what the film and the seals are chosen for — and above about three litres, how the customer lifts the pack becomes part of the design.
What the formula does
Surfactants and fragrance are hard on seals. They are also the reason a pouch that holds water perfectly can fail on your detergent — compatibility is checked on your formula, not on a stand-in.
Concentrate changes the bag, not the machine
Liquid, concentrated, softener, sanitiser and stain remover all run in the same pouch. A concentrate just means a smaller bag for the same number of washes — less freight, a smaller footprint on shelf, and one cap to one load printed across the face.
What to send
- Detergent type, and how thick it pours
- Fill volume — 1, 2, 3 or 5 litres
- Refill, or direct use
- Destination market
- Estimated quantity
Order details
- MOQ — 50,000 pcs per design, confirmed against pouch size
- Trial batch — 1,000 pcs on a single design
- Stock samples — free, you cover freight
- Custom printed samples — 7–10 days
- Production — 15–20 days after deposit and artwork approval
